Creator Electronics CR-M4102 Especificaciones descargar pdf (Pagina 284)

100

101

11 - 30

11.6 Writing to the motion CPU

Write the following data to the motion CPU:

• Servo programs

• Mechanism programs

• Cam data

1) Stop the Q motion CPU.

2) Click on [Communication] and then the [Transfer]

menu in the MECHANISM EDIT window.

3) Click and select the 'Servo program', 'Mechanism

program' and then the 'Cam data' under "Transfer

data" in the COMMUNICATION dialog box.

After selecting the data to transfer, click on the Write

button.

(The servo setting data (system setting/servo setting

data) does not need to be written as the same

settings as the real mode set in chapter 6 are used)

4) A dialog box to confirm the connection destination

CPU and main unit OS will open, so click on the YES

button.

5) When the message "Completed normally." appears,

click on the OK button.

6) Click on the END button in the COMMUNICATION

dialog box to close the dialog box.

7) Reset the Q-PLC CPU to start the Q motion CPU.

This completes writing of the data to the Q motion CPU.

1 2 ... 279 280 281 282 283 284 285 286 287 288 289 ... 359 360

Comentarios a estos manuales

Sin comentarios

Creator Electronics CR-M4102 Especificaciones Pagina 284

Comentarios a estos manuales